HMIP BSM - Homematic IP Switch Actuator a. Meter f. brand

The metering function reliably detects switched-on devices - therefore, the switch actuator and meter can be used in existing cross and two-way circuits Comfortable control via Homematic IP app and via Homematic IP Remote Control Compact design for installation in standard flush-mounting boxes Can also be integrated into existing switches by making use of existing frames and rockers With the appropriate adapter, the device can be integrated into the most popular switch designs of leading manufacturers: Busch-Jaeger, Gira, Merten, Berker, Jung, düwi, Kopp A neutral conductor is required for installation Can be used with the Access Point in connection with the Homematic IP app, the Homematic Central Control Unit CCU2 as well as with various partner solutions The Homematic IP Switch Actuator and Meter for brand switches is part of the Homematic IP smart home system. With the actuator, ohmic loads with a maximum power of 1150 W can be switched traditionally via wall-mount remote control or easily using the free Homematic IP app. Furthermore, the corresponding power consumption can be detected. Thanks to its compact design, the switch actuator and meter comfortably fits into standard flush-mounted boxes. The existing switches can be replaced in only a few single steps if, next to the phase conductor, also a neutral conductor is available in the flush-mounted box. The integrated metering function reliably detects switched-on devices - therefore, the switch actuator and meter can be used in existing cross and two-way circuits. Thanks to various adapters available, the dimming actuator can be integrated into the most common brand switch systems of Busch-Jaeger, Gira, Merten, Berker, Jung, Düwi and Kopp. The standby power consumption is approximately only 0.2 W.